Operation CHARM: Car repair manuals for everyone.
Home >> Volkswagen >> 2005 >> Passat Wagon (3B6) L4-1.8L Turbo (AWM) >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Sensors and Switches - Computers and Control Systems >> Transmission Position Sensor/Switch >> Service and Repair >> 01V, 5 SPD. A/T (FWD)

01V, 5 SPD. A/T (FWD)



Multi-function Transmission Range (TR) switch -F125-, replacing, 01V, 5 SPD. A/T (FWD)

Removing
- Remove left wheel.
- Remove left-hand transmission bracket.
- Unscrew bolts and detach multi-function TR switch -F125- from transmission; pull switch off selector shaft.

Installing
Place multi-function TR switch -F125- centrally on selector shaft. Do not tilt or use force when installing. Danger of damaging switch contacts.





- Install multi-function TR switch -F125- on selector shaft: the flat section in the splines in switch -3- must coincide with the flat section on selector shaft -1-.
- Turn switch so that drilling -4- on switch housing can be installed on locating pin -2- on transmission housing.
- Bolt multi-function TR switch -F125- to transmission and tighten.
- Install left-hand transmission bracket.
- Remove left wheel.
pro multis · About Operation CHARM