Ignition Coil: Service and Repair

Ignition Coils With Power Output Stage, Removing And Installing

Special tools, testers and auxiliary items required







- Puller T40039

Removing







- Loosen clamp screws - arrows - and remove engine cover upward.







- Disconnect 4-pin connector -2- from ignition coil -1







- Remove ignition coils with power output stages from spark plugs using Puller T40039.

Installing
- Press Ignition Coil with Power Output Stage vertically onto spark plug by hand.







- Connect 4-pin connector -2- to ignition coil -1-







- Install engine cover and engage clamp screws - arrows.