Camshaft Bearing

Camshafts bearing caps





Alternating in diagonal sequence, tighten bearing caps 2 and 4 of intake and exhaust camshafts and tighten to 10 Nm (pay attention to bushing)





Install both bearing caps on chain gears of intake and exhaust camshafts. Check camshaft for proper adjustment and tighten bearing cap to 10 Nm (pay attention to alignment bushing)





Coat hatched surface of double bearing cap lightly using sealant D 454 300 A2, install and tighten to 10 Nm (pay attention to bushing).
Install remaining bearing cap and tighten to 10 Nm (pay attention to alignment bushing).