Control Arm As of Model Year 2002, Modified

Control arm as of model year 2002, modified
In a running change from model year 2002, the wheel bearing housings are equipped with bushings for optimizing the seals of the lower control arm bearings (control arm and guide control arm).

This also leads to modifications at the control arm as well as the mounting components for control arm and guide control arm.
^ Application See Parts Catalog
^ When installing wheel bearing housings without bushings, old version control arms and flange nuts for control arm and guide control arm must be installed.
^ When installing wheel bearing housings with bushings, new version control arms and combination nuts for control arms and guide control arms must be installed.
^ If only the control arm is replaced, a control arm of the old version must be replaced again by a control arm of the old version and a new version control arm is to be treated accordingly.
^ The following are to be used for control arm and guide control arm mounting parts:

Old version control arm use flange nut

New version control arm use combination nut