Torque Converter, Installing

Torque converter, installing, 01V, 5 SPD. A/T (FWD)

Special tools and equipment
^ Depth gauge

- Push on torque converter hub to first stop via oil seal.
- Turn torque converter inward using light pressure until opening in hub engages with follower of pump sprocket and until torque converter can be felt to slip in place.





If the converter is correctly positioned, the distance between the contact surfaces below at the tapped holes in the converter and the contact surface of the converter bell of automatic transmission 01V is about 23 mm.

If the converter is not correctly positioned, the distance is about 11 mm.

WARNING: If the torque converter is left in the wrong installation position, the follower of the converter or ATF pump will be destroyed when the transmission is connected to the engine.