Headlights, Removing and Installing

Headlights From 10.00, Removing And Installing

Removing
- Disconnect battery.
- Remove front bumper and plastic reinforcement behind bumper
- Disconnect electrical connections at headlight.







- Remove cap-1-.
- Remove screws -arrows- and screw located under removed cap -1-.
- Carefully remove headlight assembly forward from opening.

Installing
Install in reverse order of removal, noting the following:

NOTE: Check for even gaps between headlight assembly and front end trim. Adjust gaps as necessary prior to tightening screws.

- Install front bumper with plastic reinforcement
- Reconnect battery.
- Check headlight aim.