Airbag Control Module, Coding

Airbag Control Module, Coding

Coding is only possible when a new control module is used.
- Connect Scan Tool. Reading and Clearing Diagnostic Trouble Codes
- Switch on ignition.

The Airbag Malfunction Indicator Lamp (MIL) -K75- lights up continuously.
- Press button -1- for "Rapid Data Transfer" mode.

Indicated on display

Rapid data transfer HELP
Enter address word XX

- Press buttons -1- and -5- (the address word of the vehicle system to be tested "Airbag" is entered with 15).

Indicated on display

Rapid data transfer Q
15 - Airbag

- Confirm with -Q- button.

Indicated on display (see parts catalog for latest control module version).

8L0 959 655 AIRBAG VW 3-S V00 ->
Coding 00000 WSC12345

- Press -> button.

Indicated on display

Rapid data transfer HELP
Select function XX

- Press buttons -0- and -7- (with 07 the function "Code Control Module" is selected).

Indicated on display

Rapid data transfer Q
07 - Code control module

- Confirm with -Q- button.

Indicated on display

Code control module Q
Enter code number XXXXX (0-32000)

- Enter code number according to Quick Reference Volkswagen Airbag Equipment and Coding table:
See Additional Information, Quick Reference Volkswagen Airbag Equipment and Coding table for appropriate vehicle and model year
- Confirm with -Q- button.

Control module identification number with letter index, code number and workshop code is displayed.

3B0 909 605 A 02 AIRBAG VW 4 S 0001
Coding 12338 WSC 12345

If contents of display are as shown then coding is successful.

If the control module identification number entered is not accepted the following will be displayed:

Indicated on display:

3B0 909 605 A AIRBAG VW 4 S 0001
Coding 00000 WSC 12345

In this case the control module has not been programmed with vehicle data.

Therefore, coding is not possible.

The Airbag Malfunction Indicator Lamp (MIL) -K75- remains on.

A check must then be completed to see if the correct control module has been installed (compare Part No. and letter index), or whether an incorrect code number has been entered.

Ending function:
- Press -> button.

Indicated on display

Rapid data transfer HELP
Select function XX

- Press buttons -0- and -6- to end the output.
- Confirm with -Q- button.

Indicated on display

Rapid data transfer Q
06 - End output

Airbag Malfunction Indicator Lamp (MIL) -K75- must go out after approx. 4 seconds.