Left Rear Level Control System Sensor -G76-, Removing and Installing

Left Rear Level Control System Sensor -G76-, Removing And Installing

Sensor is mounted to left rear suspension and is not externally adjustable.

Removing

CAUTION:
- Switch off all electrical consumers.
- Switch off ignition and remove ignition key.







- Remove screw -1-, Torx screws -arrows- and remove rear suspension cover.







- Disconnect electrical connection -2- at sensor.
- Remove hex bolt -1- (counter-hold at bolt/joint -4-).
- Remove Torx screws -3- and remove sensor.

Installation
Install in reverse order of removal.
- Bring headlight into basic setting.
See VAS 5051 Vehicle Diagnostic Testing and Information System or VAS 5052 Vehicle Diagnostic and Service System in mode "Guided Fault Finding".
- Check headlight aim.