Control Arm Mountings, Replacing

Control arm mountings, replacing

Special tools, testers and auxiliary items required:

^ Assembly tool 3301
^ Support arm bearing installation tool 3346
^ Carrier bearing installation tool 3350





Remove rear mounting

Aluminium links must only be clamped in a vise with protective clamps!





Installed location of bushing

Dimension A = 6° ± 3°





Pulling in rear mounting
^ Insert mounting - A - in 3.2 mm recess in thrust piece -3346/1-.
^ Pull mounting in onto stop.





Pulling out front mounting





Pulling in front mounting

^ Insert mounting - A - in 8 mm recess in thrust piece -3346/1-.
^ Pull mounting in onto stop.