Cover And Cushion For Backrest, Removing and Installing

Cover And Cushion For Backrest, Removing And Installing

Removing
- Remove Recaro seat.
- Remove belt buckle.
- Remove trim, backrest mounting bracket.
- Remove side seat trim.
- Remove backrest.
- Remove side airbag.
- Press release button in headrest and pull headrest out of backrest.







- Pry molding seal of cover - 6 - out of mount, side clips of molding seal - 6 - must be replaced when installing.
- Disengage backrest profiles - 5 - and - 7 - on both sides.
- Disengage two profiles - 3 -.
- Pry molding seal - 2 - out of mount, clips of molding seal must be replaced when installing.
- Disengage profile - 4 -.
- Turn back cover and pull cover upward.
- Disengage backrest profiles - 8 - on both sides.
- Remove headrest guides from backrest.
- Remove upholstery and cover - 1 - from backrest frame.
- Pull molding seal - 9 - of cover out of upholstery.

Installing
Installation is the reverse order of removal.