Wire Harness, Repair

WIRE HARNESS, REPAIR

Note: No other procedure or materials, other than those in VAS 1978, may be used for wire harness repairs, specifically soldering, wire nuts, generic repair kits, etc.

Always review Safety Precautions in VAS 1978 Instruction Manual prior to performing any wiring harness repairs.

CAUTION! Shielded wiring for components, such as speed sensors or knock sensors, may not be repaired, but must ALWAYS be replaced.

DO NOT use solder wire when repairing a wiring harness.

Only use approved methods and materials if wiring harness repairs are required.

If wiring harness repairs are required:





- Use only VAS 1978 Wire Harness Repair Kit.

- If wire harness cannot be repaired using this procedure and materials contained in VAS 1978, replace wire harness.