Air Bag System

Airbag Units, Replacing Following An Accident

Accident with airbag deployment

Note: The airbag control module does not need to be replaced after deployment unless "Control module faulty" DTC is set in the control module, or the control module is physically damaged

After a collision with airbag deployment, the following components must always be replaced:

- All deployed airbag units.
- Support for front passenger module, if front passenger airbag is deployed
- Coil connector with slip ring, if driver airbag is deployed
- All seat belts with triggered belt tensioners
- In addition, following must also be replaced if necessary (visual check): All damaged components

Accident not involving activation of airbag

Note: The airbag control module does not need to be replaced after deployment unless "Control module faulty" DTC is set in the control module, or the control module is physically damaged
If airbag malfunction indicator lamp (MIL) -K 75- does not indicate a malfunction, it is also not necessary to replace airbag components. seat belts should be checked separately.

After replacing airbag units or control module, affix stickers (only tear-off strips) to registration card and return registration card to relevant Sales Center or to Importer for registration.

Registration card 000 010 227 C must be ordered separately.