Electrically Swiveling Trailer Hitch Assembly Overview

Rear Bumper


Electrically Swiveling Trailer Hitch Assembly Overview

• The tightening specifications only apply to factory-installed trailer hitches.

• Obtain tightening specifications of other tow hitches from corresponding manufacturer.

• Information for the electrical system can be found under.

• The wiring harness can only be loosened at the socket and the connector in the carrier.





1 Tow hitch carrier

• Remove bumper cover.

2 Bolt

• Quantity: 8

• 100 Nm + 90° additional turn

• Always replace bolts after loosening them.

3 Power outlet

4 Ball head

• Electrically swiveling

5 Adjusting motor

6 Connector

• Only for wiring harness to adjusting motor

7 Foam piece

• Self-adhesive

8 Control module

9 Wiring harness

• A wiring harness to socket

• A separate wiring harness to adjusting motor