Fuel Filler/Rear Lid Remote Unlocking Button, From 02.03

Front Door Lamps and Switches


Fuel Filler/Rear Lid Remote Unlocking Button, from 02.03

CAUTION!
• By reason of the cable length for connector, door trim must be removed in order to be able to disconnect the connector without destroying it.

• When removing and installing components in visible area (switches, covers, trim, etc.), cover by taping the areas at which a prying tool (plastic wedge, screwdriver) will be positioned using commercially available adhesive tape.

Removing

- Switch off ignition, switch off all electrical consumers and remove ignition key.

- Remove door trim.

- Disconnect connector - 1 - from Fuel Filler/Rear Lid Remote Unlocking Button (E463) - 2 -.





- Pull installation frame of Fuel Filler/Rear Lid Remote Unlocking Button (E463) in - direction of arrow - and remove it.





- Disengage retaining tabs - arrows - and remove Fuel Filler/Rear Lid Remote Unlocking Button (E463) - 1 - from installation frame - 2 -.





Installing

Install in reverse order of removal.