Fuel Filler/Rear Lid Remote Unlocking Button, Through 01.03

Front Door Lamps and Switches

Fuel Filler/Rear Lid Remote Unlocking Button, through 01.03

CAUTION!
When removing and installing components in visible area (switches, covers, trim, etc.), cover by taping the areas at which a prying tool (plastic wedge, screwdriver) will be positioned using commercially available adhesive tape.

Removing

- Switch off ignition, switch off all electrical consumers and remove ignition key.

- Pull installation frame of Fuel Filler/Rear Lid Remote Unlocking Button (E463) in - direction of arrow - and remove it.

- Unlock and disconnect electrical connections - arrows -.

- Disengage retaining tabs - arrows - and remove button from installation frame.

Installing

Install in reverse order of removal.