Window Regulator Switch (In RF Door) E107, Removing and Installing

Window Regulator Switch (in RF Door) E107, Removing And Installing

NOTE: Switch illumination bulbs integrated with switch cannot be replaced separately. In the event of illumination bulb malfunction, replace entire switch.

Removing:

CAUTION:
- Switch off all electrical consumers.
- Switch off ignition and remove ignition key.
- When removing switches, trim, covers or displays, prevent damage to visible areas by always applying appropriate tape to area surrounding the component, and the tools being used (screwdrivers, wedges etc.).

- Remove appropriate door trim.







- Release and disconnect electrical connection - arrow -.







- Release retainers - arrows - and remove switch together with installation frame from door trim.







- Release retainer - arrows - and remove switch from installation frame.

Installing:
Install in reverse order of removal.