Tightening Torque & Sequences
CYLINDER HEADCylinder Head Cover Bolt Tightening Sequence and Specification
Tighten the bolts - 1 through 16 - in the sequence shown to 10 Nm.
Cylinder Head Bolt Tightening Sequence and Specification
Tighten the cylinder head bolts in the sequence shown, in four passes as follows (- arrow - points in driving direction).
First pass = 30 Nm
Second pass = 60 Nm
Third pass = 1/2 additional turn (180°)
Final pass = 1/2 turn (180°)
CAMSHAFT BEARING CAP
Bearing Cap Bolt 8 Nm + 90 degrees turn
Bolt and Nut M6 10 Nm
Bolt and Nut M8 20 Nm
Bolt and Nut M10 45 Nm
Bolt and Nut M12 60 Nm
FLYWHEEL/FLEX PLATE
Drive Plate Bolt 50 Nm + 90 degree turn
OIL PUMP
Oil Pump Bolt 8 Nm + 1/4 turn (90°)
WATER PUMP
Coolant Pump bolt 20 Nm + 90 degrees turn
Coolant Pump Cover Bolt Tightening Sequence and Specification
Tighten the bolts - 1 through 5 - in the sequence shown to 8 Nm.