Front Suspension (AWD)

Oil level for decouplable stabilizer bar hydraulic system, checking and filling

Special tools, testers and auxiliary items required





^ Vehicle diagnostics, measurement and information system VAS 5051
^ Plastic spray bottle (commercially available)

- Switch hydraulic system pressureless, with the Vehicle Diagnosis, Testing and Information System VAS 5051.
- Remove left taillight.





- Remove plug - arrow - from filling hole.





- Cut tip - arrow - off of plastic spray bottle.

Mark dimension - X -.
X = 135 mm





- Guide plastic spray bottle hose into filling hole, up to applied mark.





- Add enough central hydraulic oil and power steering oil G 002 000 or G 004 000 M2 until, through intake with the plastic spray bottle, oil climbs in the hose.
- Extract enough oil out of the reservoir with the plastic spray bottle until air climbs in the hose. Then observe the applied marking on the hose.