Steering Column

Steering Column Switches, Multi-pin Connector Assignments







NOTE: Not all components or systems listed here are applicable to USA/CDN. Always refer to applicable US/CDN wiring diagrams.

I Multi-pin electrical connection for switch for Easy Entry function
II Multi-pin electrical connection for Steering Wheel Tiptronic Switch E389
III Multi-pin electrical connection for Airbag Spiral Spring/Return Spring With Slip Ring F138 and Steering Angle Sensor G85
IV Multi-pin electrical connection for power supply, CAN-Bus and Terminal 15

I - 4-pin Connector







1. On/off for Easy Entry
2. Direction selection
3. Ground (GND) - Terminal 31
4. open

II - 5-pin Connector







1. open
2. open
3. open
4. Ground (GND) - Terminal 31
5. Tiptronic

III - 4-pin Connector







3. Spiral spring connection
4. Spiral spring connection
5. Spiral spring connection
6. Spiral spring connection

IV - Connector, 16-pin







1. Ground (GND) - Terminal 31
2. Positive ( B-) - Terminal 30
3. Powertrain CAN-Bus - shielding
4. open
5. CCS switch setting "Off"
6. open
7. open
8. Convenience CAN-Bus, Low
9. Convenience CAN-Bus, High
10. Powertrain CAN-Bus, High
11. Powertrain CAN-Bus, Low
12. open
13. Switched Positive - Terminal 15
14. open
15. open
16. open