Side Panel Tail Lamp Assembly Overview

Side Panel Tail Lamp Assembly Overview





- Tightening specifications --> [ Tail Lamps ] Tail Lamps

1 - Connector

• For taillamp assembly in side panel

2 - Bulb holder

• Removing and installing --> [ Side Panel Tail Lamp Bulb Holder ] Tail Lamps

3 - Left Rear Turn Signal Lamp (M6) and Right Rear Turn Signal Lamp (M8)

• 12V / PY 21 W

• Checking --> [ Vehicle Electrical System Output Diagnostic Test Mode ] Initial Inspection and Diagnostic Overview

4 - Left Brake/Tail Lamp (M21) and Right Brake/Tail Lamp (M22)

• 12V / P 21 W / 4 W

• Checking --> [ Comfort System Central Control Module Output Diagnostic Test Mode ] Scan Tool Testing and Procedures

5 - Cap

6 - Screws

• For taillamp assembly in side panel

7 - Lock nut

8 - Housing

• Removing and installing --> [ Side Panel Tail Lamps ] Tail Lamps

• Gap dimensions --> [ Tail Lamp Gap Dimensions ] Tail Lamp Gap Dimensions

• The adjustable tail lamp assembly carrier is installed on retaining plate
• Adjustable tail lamp assembly carrier in side panel --> [ Adjustable Tail Lamp Assembly Carrier in Side Panel ] Tail Lamps

9 - Ball head

10 - Plastic clip nut

• Replace for every removal of the taillamp assembly

11 - Bracket

• Installing adjustable tail lamp assembly carrier --> [ Adjustable Tail Lamp Assembly Carrier in Side Panel ] Tail Lamps