Luggage Compartment Lamp

Luggage Compartment Lamps and Switches

Luggage Compartment Lamp

CAUTION!
When removing and installing components in visible area (switches, covers, trim, etc.), cover by taping the areas at which a prying tool (plastic wedge, screwdriver) will be positioned using commercially available adhesive tape.

• Two luggage compartment lamps are installed. Removal and installation is the same for both luggage compartment lamps and is only described for one of the lamps.

Removing

- Switch off ignition, switch off all electrical consumers and remove ignition key.

- Carefully pry out Luggage Compartment Lamp (W3) using a screwdriver.





- Release and disconnect the connector - arrow -.





Bulb, replacing

- Push contact plate - 1 - of Luggage Compartment Lamp (W3) in - direction of arrow - and remove lamp lamp - 2 - out of socket.





- Replace bulb (12V, 10 W).

Installing

Install in reverse order of removal.