Rear Lid Courtesy Lamp

Luggage Compartment Lamps and Switches


Rear Lid Courtesy Lamp

CAUTION!
When removing and installing components in visible area (switches, covers, trim, etc.), cover by taping the areas at which a prying tool (plastic wedge, screwdriver) will be positioned using commercially available adhesive tape.

Removing

- Switch off ignition, switch off all electrical consumers and remove ignition key.

- Carefully pry out Rear Lid Courtesy Lamp (W51) using a screwdriver.





- Release and disconnect the connector - arrow -.





Bulb, replacing

- Release retaining tab - 1 - and remove reflector plate - 2 -.





- Push contact plate - 1 - of Rear Lid Courtesy Lamp (W51) in - direction of arrow - and remove lamp - 2 - out of socket.





- Replace bulb (12V, 5 W).

Installing

Install in reverse order of removal