Underhood Lamp: Service and Repair

Engine Compartment Lamp

CAUTION!
When removing and installing components in visible area (switches, covers, trim, etc.), cover by taping the areas at which a prying tool (plastic wedge, screwdriver) will be positioned using commercially available adhesive tape.

Removing

- Switch off ignition, switch off all electrical consumers and remove ignition key.

- Carefully pry out lamp using a screwdriver.





- Remove lamp socket - arrow - from Engine Compartment Lamp (W27).





Bulb, replacing

- Carefully remove bulb from socket.





- Replace bulb (12V, 5 W).

Installing

Install in reverse order of removal.