Ribbed Belt

Ribbed Belt

Special tools, testers and auxiliary items required

• Locking Pin (T10060 A)

Ribbed belt, removing

- Remove noise insulation pan.

- Mark direction of rotation of ribbed belt.

- Turn wrench clockwise until tensioning element can be locked in place using Locking Pin (T10060 A).





- Remove ribbed belt.

Ribbed belt, installing

• Ensure, before installing ribbed belt, that all ancillaries (generator, air conditioner compressor, power steering pump) are secured tightly.

• Check that idler roller turns easily.

• Note previously marked direction of belt rotation and be sure that it is seated correctly on pulley.

- Route ribbed belt as shown.





After completing repairs:

- Start engine and check belt running.