Ignition System Components, Assembly Overview

Ignition System Components, Assembly Overview







1. Connection for knock sensor
- Secured to fuel rail with retaining strap
2. Knock sensor 1 G61
- Sensor contacts and connector contacts gold plated
- Knock sensor wiring fastened to coolant pipe
3. 20 Nm
- Torque setting influences the function of knock sensor
4. Camshaft position (CMP) sensor 2 G163
- For intake camshaft, bank 2
- Sensor contacts and connector contacts gold plated
5. 10 Nm
6. 25 Nm
7. Washer
- Conical
- Note installation position
8. Hood
- For Hall sender
- Observe installed location
9. Ignition coil with power output stage (N70, N127, N291, N292, N323, N324, N325, N326)
- Remove and install with puller T40039 only.
10. Spark plug, 30 Nm
- Remove and install with spark plug removal tool 3122B
- Type and spark plug gap.
11. Knock sensor 2 G66
12. Bracket
13. 10 Nm
14. Camshaft Position (CMP) sensor G40
- For intake camshaft, bank 1
- Sensor contacts and connector contacts gold plated