Scan Tool Testing and Procedures

Self-leveling suspension, basic (default) setting
- Check basic setting of self-levelling suspension.

Connect VAS 5051.

Then
- Press "Suspension".
- Press "Self-leveling suspension".
- Press "01-On Board Diagnostic (OBD)".
- Press "Functions".
- Press "Basic setting".

The VAS 5051 will now display the specifications for basic setting.
- Measure the actual ride heights on vehicle.
- If the values deviate, the values measured for the self-leveling suspension must be entered into the control unit using VAS 5051.

The self-levelling suspension control module "calculates" the values entered and then sets the vehicle at the level for the basic (default) setting.