Transmission

Transmission 09D, 6 Speed A/T AWD
^ If caps are removed from transmission or transmission has no oil, do not run engine and do not tow vehicle.
^ First, always clean connection points and vicinity and then loosen.
^ When installing transmission, make sure alignment sleeves are correctly seated between engine and transmission.
^ Place removed parts on a clean surface. Cover parts to prevent soiling. Use sheeting or paper. Use lint-free cloths only!
^ Carefully cover or plug unpacked components if repairs cannot be performed immediately.
^ Only install clean parts: Remove packing from replacement parts immediately prior to installation and not before.
^ Do not run engine or tow vehicle with oil pan removed or when there is no ATF in the transmission.
^ If the transmission is removed from the vehicle, secure the torque converter to prevent it from falling out.
^ Before installing transmission, check torque converter position.
^ Check ATF level after installing.