VAS 5051, Connecting

VAS 5051, Connecting

Special tools, testers and auxiliary items required

• Vehicle diagnosis, testing and information system (VAS 5051)

CAUTION!
• Test equipment must always be secured on the rear seat during a road test.

• These devices may only be operated by a passenger during a test drive.

- Plug the connector of diagnostic cable (VAS 5051/1) or (VAS 5051/3) into the vehicle diagnostic connector.





- Switch on tester - arrow -.





Tester is ready for operation when you can select between fields/buttons Guided Functions and Guided Fault Finding at right of display.

Depending on equipment and tester version, additional functions may be displayed, for example:

• Elsa

• Measuring technique

• On Board Diagnosis (OBD)

Tester is not ready for operation.

- Switch on ignition.

- Touch a field/button on the display to start desired function.