Instrument Cluster

Instrument Cluster

• Prior to replacing the instrument cluster, perform the procedure " Instrument Cluster, Replacing" to check the data stored in the control module. Refer to => [ Instrument Cluster ] Instrument Cluster.

Removing

- Switch off ignition, switch off all electrical consumers and remove ignition key.

• Removal of the steering wheel is not necessary.

- Pull steering wheel all the way out and lock it in the lowest position.

- Remove upper section of steering column trim

- Remove mounting bolts - arrows - of instrument cluster.





• The fixed electrical connection to the instrument cluster is disconnected automatically when the cluster is pulled out of the instrument panel opening. Harness connector is installed permanently in vehicle and is disconnected automatically when pulling out instrument cluster.

- Pull instrument cluster out of instrument panel.

Installing

Install in reverse order of removal.