Resetting With VAS 5051 / 5052

Reset the service interval indicator with the VAS 5051A /52

Special tools, testers and auxiliary items required




- Diagnosis, Measurement and Information System VAS 5051A /52
- Diagnosis cable VAS 5051/3
- Operate the parking brake.
- Automatic transmission: Position the selector lever in "P" or "N".
- Mechanical transmission: selector lever at dead center.
- Turn the Vehicles diagnosis, measurement and information system VAS 5051 on.
- Turn the ignition on.

This Image Is Used For Illustration Purposes Only.:

The display shows:

- On the display, press the "Vehicle self-diagnosis" key -arrow-.

Note: In case the operations are not shown on the display: Diagnosis, measurement and information system instruction manual for vehicles VAS 5051.

This Image Is Used For Illustration Purposes Only.:

The display shows:

- On the display, press the "17 Instrument panel" -arrow-.

This Image Is Used For Illustration Purposes Only.:

The display shows:

The command unit identification and the code -arrow- :

- On the display, press direction key -1-.

This Image Is Used For Illustration Purposes Only.:

The display shows:

- On the display, press "10 - Adaptation" -arrow-.

This Image Is Used For Illustration Purposes Only.:

The display shows:

- On the display keypad press -arrow- keys 0 and 2.

With adaptation channel 02 the service interval indicator is reset.

- Confirm the entry by pressing key Q on the display keypad.

This Image Is Used For Illustration Purposes Only.:

The display shows:

- Move the position indicator -arrow- on the display to the left, until 0 is shown above the scroll bar -1-.

- On the display, press Save Button -2-.

This Image Is Used For Illustration Purposes Only.:

The display shows:

- On the display, press "Accept" -arrow-.

This Image Is Used For Illustration Purposes Only.:

The display shows:

- On the display, press Go to Button -arrow-.

This Image Is Used For Illustration Purposes Only.:

The display shows:

- On the display, press the Exit button -arrow-.

- On the exit menu, press Exit button.

- Turn the ignition off and disconnect the diagnosis connectors.

- Turn the ignition on.

When the ignition is turned on, no service will be shown on the instrument panel odometer display.

- Turn the ignition off.

- Install the central console cover.