Steering: Testing and Inspection

Connecting VAS 5051 and selecting functions
Special tools, testers and auxiliary items required

Vehicle Diagnosis, Testing and Information System VAS 5051:

^ Diagnostic cable VAS 5051/1 or VAS 5051/3

CAUTION:
^ During a test drive, the testing and measuring equipment must be secured on the rear seat.
^ When vehicle is being driven, a second technician must operate this equipment.





- Pull cover - 1 - off in direction of - arrow -.
- With ignition switched off, connect tester VAS 5051 to Data Link Connector using diagnosis cable VAS 5051/1 or VAS 5051/3.





- Connect VAS 5051 Vehicle Diagnosis, Testing and Information System - arrow -.

The testing and information system is ready to be used when it shows a vehicle on the screen.
- Switch on ignition.
- Press button/field on display for "Guided Fault Finding".
- Select one after another:
^ Brand
^ Type
^ Model year
^ Version
^ Engine code

- Confirm data entered.

Note:
^ Wait until the vehicle diagnosis, testing and information system has checked aft the available control modules in vehicle.

- Press Go to button and select Function/component selection function

Note:
^ Now follow the instructions given on screen to start the desired functions.