Operation CHARM: Car repair manuals for everyone.

Diagram 604/9 (Tracks 99-112)






IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Power and signal splices





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

E1 - Light Switch

J388 - Left Rear Door Control Module Central Locking / Anti-Theft Systems

J389 - Right Rear Door Control Module

J393 - Comfort System Central Control Module Comfort System Central Control Module -J393-

J519 - Vehicle Electrical System Control Module Vehicle Electrical System Control Module -J519-

J533 - Data Bus On Board Diagnostic Interface Component Locations

J603 - Vehicle Position Recognition Control Module

SB12 - Fuse 12 (on fuse panel B)

SB24 - Fuse 24 (on fuse panel B)

SC13 - Fuse 13 (on fuse panel C) Locations

SC24 - Fuse 24 (on fuse panel C) Locations

T8h - 8-Pin Connector

T10h - 10-Pin Connector

T16 - 16- pin connector, Data Link Connector (DLC), bellow steering column, left

T18 - 18-Pin Connector

T18b - 18-Pin Connector

T18c - 18-Pin Connector

T20 - 20-Pin Connector

T28b - 28-Pin Connector

T28c - 28-Pin Connector

T40 - 40-Pin Connector

(A164) - Plus Connection 2 (30a) (in instrument panel wiring harness)


- Location: In wiring circuit between main wiring harness and J533 - Data Bus On Board Diagnostic Interface 1)

(A167) - Plus Connection 3 (30a) (in instrument panel wiring harness)


- Location: In main wiring harness between wiring circuits for power supply (SC) and E1 - Light Switch

(A168) - Plus Connection 4 (30a) (in instrument panel wiring harness)


- Location: In wiring circuit between main wiring harness and J393 - Comfort System Central Control Module

(*) - Engine code BPY only

(1)) - Through June 2007

Previous Diagram 604/8 (Tracks 85-98)

Next Diagram 604/10 (Tracks 113-126)