Engine, Securing to Assembly Stand

Engine, Securing to Assembly Stand

Special tools, testers and auxiliary items required

• Holding fixture (VW 313)

• Engine and transmission holder (VW 540)

• Lifting tackle (2024 A)

• Engine/transmission jack (V.A.G 1383 A)

• Shop crane (VAS 6100)

Secure engine to holding fixture (VW 313) of assembly stand using holding fixture (VW 540) when performing repair work.

Procedure

- Move engine/transmission jack (V.A.G 1383 A) on a workbench.





- Lower the engine/transmission assembly so that transmission makes contact.

- Remove connecting bolts for engine/transmission.

- Press transmission off from engine.

- Hook the engine sling (2024 A) as follows and lift the engine using workshop crane (VAS 6100) or workshop crane (V.A.G 1202 A) out of the engine/transmission jack (V.A.G 1383 A).





Belt pulley side: 2. Bore of the hole rail in position 1

Flywheel side: 4. Bore of the hole rail in position 8

CAUTION!
Use securing pins at hooks and pins.

• The peg positions on the carrying strap marked with 1 through 4 face the belt pulley.

• The bores in the hole rail are counted from the hook.

- Secure engine with holding fixture (VW 540) on holding fixture (VW 313).