Engine and Transmission Mount Tightening Specifications

Engine and Transmission Mount Tightening Specifications

Engine Mount





A = 20 Nm + 90° (1/4 additional rotation) - replace the bolts

B = 40 Nm + 90° (1/4 additional rotation) - replace the bolts

C = 60 Nm + 90° (1/4 additional rotation) - replace the bolts

Transmission Mount





A = 40 Nm + 90° (1/4 additional rotation) - replace the bolts

B = 60 Nm + 90° (1/4 additional rotation) - replace the bolts

Pendulum Supports





A Strength class 8.8 = 40 Nm + 90° (1/4 additional rotation) - replace the bolts

A Strength class 10.9 = 50 Nm + 90° (1/4 additional rotation) - replace the bolts

B = 100 Nm + 90° (1/4 additional rotation) - replace the bolt

Removing: First remove bolt - B -, then bolts - A -.

Installing: First install bolts - A -, then bolt - B -.