Front Bumper Cover

Front Bumper Cover

• Before replacing bumper cover, explore possibility of repairing damage to plastic.

Description under. Refer to

• Due to model variations, small deviations may be present during removal and installation.

Removing

- Remove radiator grille. Refer to => [ Radiator Grille ] Radiator Grille.

- In vehicles with headlamp cleaning system, pull out spray nozzles with cover cap from bumper cover until it stops and unclip cover cap.

- Remove screws - 2 -.

- Remove bolts - 5 - from below.

- Unscrew bolts - 4 - and - 1 - (pointing upward) in area of left and right wheel housing liners.

• A second technician is required for the rest of the removal procedure.

- With a second technician, pull bumper cover - 3 - parallel out of guide profiles.

- Disconnect harness connectors of installed electrical components and hoses.





Installing

Installation is performed in the reverse order of removal.

Make sure gaps are parallel and pay attention to gap dimensions.