Rear Lid Assembly Overview

Rear Lid Assembly Overview






1 Hinge Cover

2 Wiring Harness

3 Rear Lid

• Removing and installing, refer to=> [ Rear Lid ] Rear Lid

• Adjusting, refer to => [ Adjusting Rear Lid ] Adjusting Rear Lid

4 Rear Lid Trim

• Removing and installing, refer to

5 Adjustment Buffer

• Left and right

• To install, rotate 90° toward left - arrow -

• Adjusting, refer to => [ Adjusting Rear Lid ] Adjusting Rear Lid

6 Hex Nut

• Qty. 2

• 22 Nm

7 Rear Lid Hinge

• Removing and installing, refer to => [ Rear Lid Hinge ] Rear Lid Hinge

8 Rubber Buffer

9 Bolt

• Qty. 3

• 22 Nm

10 Gas Strut

• Removing, refer to => [ Gas-Filled Strut ] Gas-Filled Strut

• Venting gas, refer to => [ Venting Gas-Filled Strut ] Venting Gas-Filled Strut

11 Screw

• Qty. 2

• 23 Nm

12 Striker

• Removing and installing, refer to => [ Striker ] Striker

13 Pop Rivet

14 Identification plate

• Different versions

• Assignment, refer to Electronic Parts Catalog.