Entry Lamp

Entry Lamp

• Removing and installing is described only for the left ambient light. Removing and installing right ambient light is derived accordingly from this.

Removing

- Remove mirror glass. Refer to => [ Mirror Glass ] Mirror Glass.

- Remove mirror housing. Refer to => [ Mirror Housing ] Mirror Housing.

- Remove trim. Refer to => [ Trim Panel ] Trim Panel.

- Remove assembly piece with side turn signal. Refer to => [ Side Turn Signals ] Side Turn Signals.





- Remove bolt - 1 -.

- Swivel ambient light - 2 - downward and out and remove light bulb from ambient light housing.

Installing

Installation is performed in the reverse order of removal.

Tightening torque of bolt for ambient light: 1 Nm

- Perform a function test.