Sunroof Glass Panel Drive Motor, Adjusting Neutral Position

Sunroof Glass Panel Drive Motor, Adjusting Neutral Position

Adjustment of zero position may be necessary if the drive motor was removed while not in zero position or the glass panel of sunroof was closed or opened via emergency operation.

• Drive motor removed, but electrical wires connected.

- Move automatic rotary switch to "roof opened" position.

- Move automatic rotary switch to "roof closed" position.

- Move automatic rotary switch to "roof tilted" position.

- Move automatic rotary switch to "roof closed" position.

- Install drive motor in this position (zero position) with glass panel of sunroof closed.

Drive motor for glass panel of sunroof is in zero position when a white dot can be seen in the opening - arrow - of drive motor.