Wind Deflector

Wind Deflector

Removing

- Open sunroof glass panel completely.

- Press wind deflector with height stop out of front roof cut-out and tilt wind deflector open vertically.

- Insert hook for front end (3370) between roof edge and wind deflector bearing - arrow -.





- Pull wind deflector bearing out of side locking mechanism of left and right guide rails using hook for front end (3370) in - direction of arrow -.

- Remove wind deflector upward from guide rail.

Installing

- Insert wind deflector into guide rail and slide wind deflector with height stop under front roof cut-out at left and right sides.

- Using light pressure, press wind deflector bearing into guide rails.

• Wind deflector bearing must engage in guide rails audibly.