Central Locking -SAFE- Indicator Lamp (K133)

Central Locking -SAFE- Indicator Lamp (K133)

Special tools, testers and auxiliary items required

• Trim Removal Wedge (VAS 3409)

The central locking -SAFE- indicator lamp is installed near the exterior mirror in the driver door trim panel.


• Turn off the ignition and all electrical consumers.

• Remove the key.

• When removing and installing components in visible area (switches, covers, trim, etc.), cover by taping the areas at which a prying tool ( (VAS 3409) , screwdriver) will be positioned using commercially available adhesive tape.

Removal

- Remove the door trim panel on the driver side.

- Press the tabs - arrows - and remove the central locking -SAFE- indicator lamp - 1 - from the door trim panel.






- Disconnect the connector - 1 - an central locking -SAFE- indicator lamp - 2 -.






Installation

Installation is performed in the reverse order of removal. Note the following:

- Make sure the central locking -SAFE- indicator lamp engages in the door trim securely.