Diagram 260/9 (Tracks 99-112)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Multi-function Indicator, Instrument Cluster Control Module, Data Bus On Board Diagnostic Interface, Ignition Key Withdrawal Lock Solenoid





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

J119 - Multi-function Indicator

J285 - Instrument Cluster Control Module Component Locations Steering Column Electronic Systems Control Module -J527-

J519 - Vehicle Electrical System Control Module Component Locations Vehicle Electrical System Control Module -J519-

J527 - Steering Column Electronic Systems Control Module Component Locations Steering Column Electronic Systems Control Module -J527-

J533 - Data Bus On Board Diagnostic Interface Component Locations Locations

N376 - Ignition Key Withdrawal Lock Solenoid

T12j - 12-Pin Connector

T16 - 16-Pin Connector

T20 - 20-Pin Connector

T36 - 36-Pin Connector

(A76) - K-Diagnosis Wire Connection (in instrument panel wiring harness)

(B383) - Powertrain CAN-Bus High Connection 1 (in main wiring harness)

(B390) - Powertrain CAN-Bus Low Connection 1 (in main wiring harness)

(B397) - Comfort System CAN-Bus High Connection 1 (in main wiring harness)

(B406) - Comfort System CAN-Bus Low Connection 1 (in main wiring harness)

Previous Diagram 260/8 (Tracks 85-98)