Diagram 603/18 (Tracks 225-238)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Ground splices





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

E176 - Driver's Seat Lumbar Support Adjustment Switch

G59 - Driver's Heated Seat Temperature Sensor

J131 - Driver's Heated Seat Control Module Heated Driver Seat Control Module -J131-

J136 - Memory Seat/Steering Column Adjustment Control Module

J388 - Left Rear Door Control Module Central Locking / Anti-Theft Systems

J519 - Vehicle Electrical System Control Module Vehicle Electrical System Control Module -J519-

T2d - Double Connector

T4l - 4-Pin Connector

T4at - 4-Pin Connector

T6ah - 6-Pin Connector

T8v - 8-Pin Connector

T10a - 10-Pin Connector

T18b - 18-Pin Connector

T28b - 28-Pin Connector

Z6 - Driver's Seat Heating Element

Z7 - Driver's Backrest Heating Element

Z31 - Driver's Seat Side Bolster Heater

(77) - Ground Connection (on left lower B-pillar) Locations

(95) - Ground Connection 1 (in power seat wiring harness)


- Location: In power seat wiring harness between wiring circuits for V296 - Front Seat Height Adjustment Motor and J136 - Memory Seat/Steering Column Adjustment Control Module

(96) - Ground Connection 1 (in heated seats wiring harness)


- Location: In heated seats wiring harness between wiring circuits for E24 - Driver's Safety Belt Switch and Z7 - Driver's Backrest Heating Element

(136) - Ground Connection 2 (in heated seats wiring harness)


- Location: In heated seats wiring harness inside of seat

(*) - Power seats, power driver's seat with memory only

Previous Diagram 603/17 (Tracks 211-224)

Next Diagram 603/19 (Tracks 239-252)