Diagram 603/25 (Tracks 323-336)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Ground splices





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G212 - EGR Potentiometer Locations

G500 - Turbocharger(TC) Vane Position Sensor

J519 - Vehicle Electrical System Control Module Vehicle Electrical System Control Module -J519-

J623 - Engine Control Module (ECM)

N240 - Pump/Injector Valve (cylinder 1)

N241 - Pump/Injector Valve (cylinder 2)

N242 - Pump/Injector Valve (cylinder 3)

N243 - Pump/Injector Valve (cylinder 4)

T8r - 8-Pin Connector

T60 - 60-Pin Connector

(D104) - Plus Connection 2 (30a) (in engine compartment wiring harness)


- Location: In engine compartment wiring harness between wiring circuits for G62 - Engine Coolant Temperature (ECT) Sensor and G500 - Turbocharger(TC) Vane Position Sensor

(D140) - Connection (injectors) (in engine pre-wiring wiring harness)


- Location: In wiring circuit between engine pre-wiring wiring harness and J248 - Diesel Direct Fuel Injection (DFI) Engine Control Module (ECM)

(E48) - Fuel Injector Connection (in fuel injection system wiring harness)


- Location: In fuel injection system wiring harness near of N240 - Pump/Injector Valve (cylinder 1) at the end of plastic part

Previous Diagram 603/24 (Tracks 309-322)

Next Diagram 603/26 (Tracks 337-350)