Operation CHARM: Car repair manuals for everyone.

Diagram 35/22 (Tracks 281-294)






IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Vehicle Electrical System Control Module , Data Bus On Board Diagnostic Interface, Data Link Connector (DLC)





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

J217 - Transmission Control Module (TCM) Transmission Control Module (TCM) -J217-

J220 - Motronic Engine Control Module (ECM

J234 - Airbag Control Module Airbag Control Module -J234-

J248 - Diesel Direct Fuel Injection (DFI) Engine Control Module

J519 - Vehicle Electrical System Control Module Vehicle Electrical System Control Module -J519-

J533 - Data Bus On Board Diagnostic Interface Locations

T16 - 16- pin connector, Data Link Connector (DLC), below steering column, left

T20 - 20-Pin Connector, at J533

T52 - 52-Pin Connector

T75 - 75-Pin Connector

T94 - 94-Pin Connector

T121 - 121-Pin Connector

(385) - Ground Connection 20 (in main wiring harness

(A76) - Connection (K-diagnosis wire) in instrument panel wiring harness

(A192) - Plus Connection 3 (15a) (in instrument panel wiring harness)

(B383) - Powertrain CAN-Bus High Connection 1 (in main wiring harness

(B390) - Powertrain CAN-Bus Low Connection 1 (in main wiring harness)

(B397) - Comfort System CAN-Bus High Connection 1 (in main wiring harness

(B406) - Comfort System CAN-Bus Low Connection 1 (in main wiring harness)

Previous Diagram 35/21 (Tracks 267-280)

Next Diagram 35/23 (Tracks 295-308)