Diagram 65/27 (Tracks 351-364)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Power and signal splices





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G44 - Right Rear ABS Wheel Speed Sensor Wheel Speed Sensors and Pad Sensors

G46 - Left Rear ABS Wheel Speed Sensor Wheel Speed Sensors and Pad Sensors

J104 - ABS Control Module ABS Control Module (models with ABS / EDL/ASR) -J104-

J519 - Vehicle Electrical System Control Module Component Locations Vehicle Electrical System Control Module -J519-

T26a - 26-Pin Connector

T47 - 47-Pin Connector

(D146) - Connection (speed sensor rear, left +), in wiring harness engine compartment Location: In main wiring harness between wiring circuits for G46 - Left Rear ABS Wheel Speed Sensor and N201 - Rear Passenger's Side Airbag (driver's side) Igniter

(D147) - Connection (speed sensor rear, left -), in wiring harness engine compartment Location: In main wiring harness between wiring circuits for G46 - Rear Side Airbag Crash Sensor (on driver's side) and N201 - Rear Passenger's Side Airbag (driver's side) Igniter

(D148) - Connection (speed sensor rear, right +), in wiring harness engine compartment Location: In main wiring harness between wiring circuits for N201 - Rear Passenger's Side Airbag (driver's side) Igniter and N202 - Rear Passenger's Side Airbag (front passenger's side) Igniter

Previous Diagram 65/26 (Tracks 337-350)

Next Diagram 65/28 (Tracks 365-378)