Computers and Control Systems: Technical Service Bulletins
- Recalls
- Customer Interest
- Engine Controls - Noise After Cold Start And DTC P3081
- Ignition System - MIL ON/DTC's P0300-P0312 Stored
- A/T - 'PRNDS' Indicator ON/DTC's Set/Emergency Mode
- Emissions - Possible MIL ON/Cat Converter DTC's Set
- Engine Controls - Exhaust Noise/DTC's P0011/P000A
- A/T - Won't Shift Out of PARK/DTC's U0101/28773/01315
- Engine Controls - MIL ON/DTC's P001, P000A Set
- A/T - High Launch RPM's/DTC P0716/P0740
- Engine Controls - DTC's 00545/00638 Stored
- Computers/Controls - No Communication With Scan Tools
- By Symptom
- Abnormal wear/deterioration
- Customer Interest
- Engine Controls - Noise After Cold Start And DTC P3081
- Ignition System - MIL ON/DTC's P0300-P0312 Stored
- A/T - 'PRNDS' Indicator ON/DTC's Set/Emergency Mode
- Emissions - Possible MIL ON/Cat Converter DTC's Set
- Engine Controls - Exhaust Noise/DTC's P0011/P000A
- A/T - Won't Shift Out of PARK/DTC's U0101/28773/01315
- Engine Controls - MIL ON/DTC's P001, P000A Set
- A/T - High Launch RPM's/DTC P0716/P0740
- Engine Controls - DTC's 00545/00638 Stored
- Computers/Controls - No Communication With Scan Tools
- Driveability
- False instrument warning light/gauges
- No shift/Incorrect gear engagement
- Recalls
- Slipping
- All Technical Service Bulletins
- Emissions - EVAP System DTC Diagnostic Information
- Emissions - Catalytic Converter Replacement Guideline
- Engine Controls- Diag. Misfire After Campaign 28F/P1
- Engine Controls - Noise After Cold Start And DTC P3081
- Emissions - Interim Repair For Recall 28F3
- Ignition System - MIL ON/DTC's P0300-P0312 Stored
- Computers/Controls - Software Version Management Info.
- A/T - 'PRNDS' Indicator ON/DTC's Set/Emergency Mode
- Computers/Controls - Control Module Testing Information
- Emissions - Possible MIL ON/Cat Converter DTC's Set
- Engine Controls - Exhaust Noise/DTC's P0011/P000A
- A/T - Won't Shift Out of PARK/DTC's U0101/28773/01315
- Engine Controls - MIL ON/DTC's P001, P000A Set
- Campaign - Engine Wiring Harness Inspection/Update
- Engine Controls - Scan Tool Displays Incorrect Values
- A/T - High Launch RPM's/DTC P0716/P0740
- Engine Controls - DTC's 00545/00638 Stored
- Engine Controls - Incorrect Mode 6 Test Limit Spec.
- Computers/Controls - No Communication With Scan Tools
- Engine Controls - Wrong Cylinder Defined For Misfire DTC
- Steering - DSR Activation And Programming Procedure
- Computers/Controls - Various Control Modules With DTC's
- Engine Controls - Avoiding Unnecessary ECM Replacement
- Engine Controls - Silicone Sealer/Lubricant Precautions