Diagram 604/36 (Tracks 477-490)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Power and signal splices





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G28 - Engine Speed (RPM) Sensor Locations

G61 - Knock Sensor (KS) 1 Locations

G66 - Knock Sensor (KS) 2 Locations

G212 - EGR Potentiometer Locations

G336 - Intake Manifold Runner Position Sensor

G500 - Turbocharger(TC) Vane Position Sensor

J410 - Left Heated Windshield Relay

J519 - Vehicle Electrical System Control Module Vehicle Electrical System Control Module -J519-

J623 - Engine Control Module (ECM)

T3y - 3-Pin Connector

T5p - 5-Pin Connector

T60 - 60-Pin Connector

(D103) - Connection 3 (in engine compartment wiring harness)


- Location: In wiring circuit between main wiring harness and J623 - Engine Control Module (ECM)

(D105) - Plus Connection 3 (58d) (in engine compartment wiring harness)


- Location: In main wiring harness between wiring circuits for G62 - Engine Coolant Temperature (ECT) Sensor and N345 - Exhaust Gas Recirculation (EGR) Cooler Switch-Over Valve 1)

(D107) - Connection 5 (in engine compartment wiring harness)


- Location: In wiring circuit between main wiring harness and J623 - Engine Control Module (ECM)

1) - Through June 2007

Previous Diagram 604/35 (Tracks 463-476)

Next Diagram 604/37 (Tracks 491-504)