Windshield Wiper System Overview

Windshield Wiper System Overview






1 Nut

• 20 Nm

2 Windshield Wiper

• Removal and installation, refer to => [ Joint-Free Wiper Blades ] Joint-Free Wiper Blades.

• Adjusting park position, refer to=> [ Windshield Wiper Blades, Adjusting Park Position ] Windshield Wiper Blades, Adjusting Park Position.

3 Wiper Arms

• Removal and installation, refer to => [ Windshield Wiper Arms ] Windshield Wiper Arms.

4 Screw

• 8 Nm

5 Wiper Frame With Linkage

• Removal and Installation, refer to => [ Disconnect the connector ] Windshield Wiper System.

6 Windshield Wiper Motor (V) with Wiper Motor Control Module (J400)

• For removing and installing wiper frame, refer to => [ Windshield Wiper Motor ] Windshield Wiper Motor (V).

• Wiper Motor Control Module (J400) Coding/Deactivating the APP Function, refer to=> [ Wiper Motor Control Module, Deactivating APP Function ] Testing and Inspection.

7 Rubber Grommet In The Bulkhead

• Note installation instructions, refer to=> [ While installing, securing pin of wiper frame must be inserted into grommet on bulkhead. ] Windshield Wiper System.

No Illustration

• Windshield wiper motor (V) bolts to the wiper frame with linkage - 8 Nm

• Windshield wiper motor crank to windshield wiper motor shaft: 18 Nm