Diagram 255/19 (Tracks 239-252)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Vehicle Electrical System Control Module, Engine Control Module (ECM)





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

J329 - Power Supply Relay (terminal 15) Locations

J519 - Vehicle Electrical System Control Module Component Locations Vehicle Electrical System Control Module -J519-

J623 - Engine Control Module (ECM)* Engine Control Module (ECM)

SC1 - Fuse 1 (on fuse panel C) Locations

SC2 - Fuse 2 (on fuse panel C) Locations

T16 - 16-Pin Connector, data link connector (DLC), below left steering column

T121 - 121-Pin Connector

(A2) - Plus Connection (15) (in instrument panel wiring harness)

(A76) - K-Diagnosis Wire Connection (in instrument panel wiring harness)

(A192) - Plus Connection 3 (15a) (in instrument panel wiring harness)

(A199) - Plus Connection 4 (15a) (in instrument panel wiring harness)

(B397) - Comfort System CAN-Bus High Connection 1 (in main wiring harness)

(B406) - Comfort System CAN-Bus Low Connection 1 (in main wiring harness)

(D136) - Plus Connection 2 (15a) (in engine compartment wiring harness)

* - on data link and fault finding just like J220

Previous Diagram 255/18 (Tracks 225-238)

Next Diagram 255/20 (Tracks 253-266)