Compass Zone, Setting

Compass Zone, Setting

1. Bring up the main menu

- Switch the ignition on.

A vehicle pictogram will appear.






- Press the button - 1 - in the windshield wiper lever one time.

- To move back out of another menu into the main menu, hold the rocker switch - 2 - depressed for two seconds.

This procedure might have to be repeated until the main menu appears.

2. Bring up the menu "Settings"

- Press the top or the bottom of the rocker switch to highlight a point on the menu.

The marked menu item will be between the two horizontal lines. There is also a small triangle on the right side.






- Highlight "settings".

- Press the button - 1 - in the windshield wiper lever.

The menu "Settings" is brought up.

3. Bring up the menu "Comfort"

- Highlight "Comfort" with the rocker switch - 2 -.

The menu "Comfort" is brought up.






4. Bring up the menu "Compass"






- Highlight "Compass" with the rocker switch - 2 -.

The menu "Compass" is brought up.

The following will appear in "compass":

1 - Direction

2 - Zone

3 - Calibration

4 - Back

5. Bring up the menu "Zone"






Select "zone" and press the button - 1 - to confirm.

The following will appear in "compass":

1 - Direction

2 - The zone (e.g. zone 8 for Germany, zone 6 for Mexico)

3 - (+1 Zone) the ability, to set 1 zone higher

4 - (-1 Zone) the ability, to set 1 zone lower

5 - Back

- Highlight "+ 1 zone" or "- 1 zone" with the rocker switch. Press the button - 1 - to maximize or minimize the compass zone appearing in the display.

6. Exit the menu






- Highlight "back" with the rocker switch - 2 -.

- Press the button - 1 -.

The menu for "Compass" is exited and the last displayed menu is brought up.